RK3588 6 TOPS NPU Custom Board, WF-C3588-S3, AndroidSBC, Bilbao

TL;DR: RK3588 6 TOPS NPU Custom Board

SHENZHEN, China, September 12, 2026 - Wanlin Longgang released a 25,155-unit WF-C3588-S3 lot for Bilbao, Spain this week, the 193rd run booked against the Rockchip RK3588 allocation.

AndroidSBC opens the custom RK3588 motherboard platform to overseas OEM buyers and industrial integrators serving Bilbao, Spain. The WF-C3588 line is a custom motherboard programme built on the Rockchip RK3588 octa-core platform (4x Cortex-A76 at 2.4GHz plus 4x Cortex-A55 at 1.8GHz on 8nm) with a triple-core NPU delivering 6 TOPS of INT8 inference, 8K H.265 decode and up to 32GB of LPDDR4X or LPDDR5. AndroidSBC, the export arm of Wanlin Manufacturing Group, builds nine custom variants at the Longgang source factory in Shenzhen for Bilbao and Spain buyers: WF-C3588-A0 custom Android motherboards, WF-C3588-I1 custom industrial boards, WF-C3588-M2 core boards and SOMs with carrier design, WF-C3588-S3 custom signage and video wall boards, WF-C3588-K4 custom kiosk and POS boards, WF-C3588-R5 custom robotics controllers, WF-C3588-N6 custom NVR boards, WF-C3588-E7 custom edge AI boards, and WF-C3588-P8 custom ARM PC and NAS boards.

About AndroidSBC and the Rockchip RK3588 Board Family

The WF-C3588 is a nine-variant custom motherboard programme from AndroidSBC, the export arm of Wanlin Manufacturing Group in Shenzhen. One Rockchip RK3588 silicon, nine custom categories: custom Android motherboards, custom industrial boards, core board and SOM work, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. Wanlin's Longgang plant handles SMT, burn-in and pre-shipment inspection in one building, and the export desk handles the CE, FCC, UKCA, RoHS and IEC 62368-1 file per lot. For Spain importers, the line covers the custom board categories a Bilbao distributor is most often asked to quote.

WF-C3588-S3 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-S3 (Custom Digital Signage and Video Wall Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Spain importers sourcing the WF-Series, the 8GB + 64GB (WF-C3588-S3-B) variant is the typical configuration for the custom signage and video wall programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Digital Signage and Video Wall Board for Spain Buyers

The recurring problem for Bilbao and Spain buyers sourcing a custom digital signage and video wall board is not the headline unit price, it is whether the allocation actually holds. The Rockchip RK3588 needs its own wafer slot, and brokers who quote from stock frequently cannot honour that slot once a 25,155-unit push lands mid-quarter. The software question follows immediately. The hardware spec sheet is easy to verify; the difference between a board that runs a launcher and a board that holds a certified, credential-locked stack only becomes visible after the first field update.

Documentation closes the list. Buyers in Bilbao have learned to ask for the test reports before the deposit, because a CE mark printed on a carton is worth nothing at the port without the Declaration of Conformity behind it. AndroidSBC moves all three risks inside the factory: the custom variant is assembled at Longgang, the certified image is burned on the same line, and the Technical File ships with the lot. Across the nine WF-C3588 variants the coverage runs from digital signage players, video wall controllers, advertising machines, interactive whiteboards, conference room displays, menu boards, wayfinding terminals, elevator screens, and DOOH networks, with three memory configurations per variant, so a Bilbao buyer can usually match a requirement from the standard custom range.

Compliance for Spain is handled at the factory rather than after arrival. In Spain the AV integration market is strong and buyers often source for both Spain and Portugal under one distribution agreement. The Longgang export desk builds the destination-market file for CE marking with SETELECO radio interface notification administered by SETELECO and issues it alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the shipment booked into Port of Valencia on the Valencia to Yantian lane.

Competitive Comparison: WF-C3588-S3 vs Competing RK3588 Boards

Three groups of board compete for the custom digital signage and video wall board socket. The first is catalogue silicon sold on price with no customization route and no certification file. The second is re-badged stock where the seller cannot produce a schematic or a test report. The third is a genuine custom platform on Rockchip RK3588 with the engineering desk, the burn-in rack and the certification file in one Longgang building. The WF-C3588-S3 sits in the third group.

• vs mainstream 4K signage players: the WF-C3588-S3 carries 8K decode and four independent outputs, which removes the multi-player rack behind a wall.
• vs PC-based video wall controllers: a single fanless board replaces a workstation-class controller, cutting power, noise and failure points per tile.
• vs signage stick vendors: the watchdog, the scheduled restart and the wide-temperature option are what keep an unattended wall alive between service visits.
• vs re-badge importers: the EDLA and CMS pre-load work happens at the source factory, so the network launches with credentials already burned per lot.

Global Custom Signage and Video Wall Board Market Trends

The Custom Signage and Video Wall Board market is the frame that decides how Spain importers time their custom digital signage and video wall board orders. The figure most Spain buyers quote when they argue about allocation is the Edge AI hardware segment, which MarketsandMarkets sizes at USD 26.9 billion in 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, Edge AI Hardware Market Report, 2025-2030); it is the public proxy for the RK3588-class silicon that custom board buyers compete for, not a forecast for this category. For Bilbao, three buying patterns are shaping the WF-C3588 order book:

• Control room video wall: a security operations centre drives twelve tiles from three quad-output boards with a single content head-end.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-S3 board carries that headroom without a board change.
• Retail menu board estate: a QSR chain pushes 4K menu loops and swaps content by time zone across the estate over OTA.

For the Custom Signage and Video Wall Board category the practical signal in Spain is that framework agreements are replacing spot buying, and the agreements are getting longer.

In all three cases, Bilbao buyers are converting spot quotes into blanket orders with a monthly lot release, because a custom motherboard programme that has to hold a twelve-month shipping window cannot tolerate a mid-year allocation break.

Partner Success Story: Ferrovia Transit Tech in Bilbao, Spain

Ferrovia Transit Tech, a rail HMI contractor serving the Spain market, deployed 5,200 custom WF-C3588-I1 industrial boards for platform HMI and gate control. The rollout covered the control room video wall, retail menu board estate, and elevator advertising screens workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 5,200 custom WF-C3588-I1 industrial boards for platform HMI and gate control
• Region: Bilbao, Spain
• Models used: WF-C3588-S3 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Ningbo-Zhoushan with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Valencia via the Valencia to Yantian lane

"Rail cabinets have no air conditioning and no patience. AndroidSBC routed the CAN and multi-serial lines we asked for, ported the Yocto BSP to our carrier, and the wide-temperature variants have now held through two summers."

- James Whitfield, Programme Manager

Field Report: a retail chain signage refresh across Bilbao, where 25,155 units of the WF-C3588-S3 board replaced legacy players in store windows

Reporter Lin Yu, on the ground in Bilbao, Spain. Crews worked store by store overnight so trading hours were never interrupted. The WF-C3588-S3 boards took the estate content package on first boot and reported back to the CMS within the hour. The chain's marketing team re-cut the window loop at 4K once the fleet was live, because the old players had capped it at 1080p.

Pallet weights were checked against the packing list at the dock, and the container was sealed 25 minutes before the cut-off.

The inspection confirmed three things on the spot: the WF-C3588-S3 units hold the burn-in with a yield above 99.35 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with SETELECO radio interface notification administered by SETELECO, cleared for entry at Port of Valencia on the Valencia to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Spain importers can hand straight to their customs broker.

Filed by Lin Yu, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-S3 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-S3 (Custom Digital Signage and Video Wall Board) as the lead SKU for Bilbao and Spain programmes:

• Control room video wall: a security operations centre drives twelve tiles from three quad-output boards with a single content head-end.
• DOOH street network: an outdoor operator runs sealed cabinets in summer heat with the fanless wide-temperature profile.
• Retail menu board estate: a QSR chain pushes 4K menu loops and swaps content by time zone across the estate over OTA.
• Airport flight information: a display contractor takes the quad-display board for cluster signage with a watchdog-guarded 7x24 uptime target.
• Interactive whiteboard: an education brand pairs the board with a touch layer, EDLA certification and a classroom launcher.
• Elevator advertising screens: a building media operator fits dual-display boards inside small cabinets with vertical content rotation.
• Conference room display: an AV integrator drives presentation walls and wireless casting from one board per room.
• Hospital wayfinding: a healthcare estate runs wayfinding terminals on the Android signage ROM with remote fleet updates.

Partnership Models for Bilbao Buyers

For Bilbao importers and brand owners, the WF-C3588-S3 and the rest of the WF-C3588 custom variants are available under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Every tier draws on the same Longgang line and the same certification desk. A Bilbao first order on the WF-C3588-S3 normally lands on the 8GB + 64GB (WF-C3588-S3-B) configuration at MOQ 5,000 units per shipment, with standard samples in 1-3 days and a 15-30 day mass-production window on custom builds.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Everything from the copper up. Custom PCB and PCBA, custom I/O routing, custom memory and storage configuration, custom display and camera interfaces, custom thermal profile from commercial to -40C to 85C industrial, and custom branding including silk-printed logo, packaging, SKU label and boot animation. The firmware side covers custom Android (GMS or AOSP), Ubuntu, Debian, Yocto and OpenHarmony builds with BSP ports handled by the Longgang engineering desk rather than handed to the buyer as an unmodified vendor drop.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Yes, and that work stays in-house. The ODM tier covers custom Android ROM builds with proprietary services and launchers, AOSP builds without Google services, and Linux images on Ubuntu, Debian, Yocto or Buildroot. BSP ports for custom carrier boards are executed by the Longgang engineering desk, with SDK and BSP source released to the partner under NDA. The same desk handles driver development for the I/O you added, which is the part that usually stalls when a factory forwards a vendor drop and walks away.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: Yes. Custom NPU development covers RKNN model deployment, quantization from the major frameworks, multi-model pipelines on the triple-core NPU, and custom AI algorithm integration. The desk validates throughput on your exact memory configuration, and the deployment lands as a versioned RKNN file that OTA can update in the field, which is how Spain partners iterate models without replacing hardware.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: The structure is deliberately two-speed: 1-3 days for a standard-variant sample so a Spain project team can start immediately, and 15-30 days to mass production on a custom run once the design freezes. MOQ is 5,000 units per shipment on standard variants, with custom and pilot quantities negotiated against the annual volume commitment.

What certifications does a custom board need for Spain, and who handles them?

Answer: Certification is part of the customization scope, not an afterthought. The in-house file covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with test reports dated inside twelve months, plus GMS and EDLA tracks for custom Android and display products. The file is built for the exact configuration you ship, which matters for a custom board because a test report on a different memory fit is not a valid report at all.

How long will AndroidSBC keep supplying a custom board?

Answer: Seven years minimum, written into the framework agreement. The RK3588 platform carries a long industrial lifecycle, and Wanlin commits to the supply window, to security patches across the Android, Ubuntu LTS, Debian LTS and Yocto tracks, and to OTA update infrastructure for field-deployed units. For a custom board that is the whole point of going to a source factory: the product lifecycle is a contract term, not a hope.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-C3588-S3 unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit record means the failure report usually carries a root cause alongside the replacement, which is what a Spain integrator running a custom configuration actually needs.

Contact AndroidSBC: Start Your WF-C3588-S3 Sourcing Conversation

The AndroidSBC export desk handles all WF-C3588 enquiries from Bilbao and Spain. Direct factory contact for the custom digital signage and video wall board is available through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with SETELECO radio interface notification for Spain, administered by SETELECO, entering at Port of Valencia on the Valencia to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To start a custom review, send the target volume, the I/O and memory changes required, and your preferred Incoterm. The export desk replies with a per-lot quotation and the MOQ matrix across the nine WF-C3588 variants within two business days.